{"id":777,"date":"2026-10-26T03:33:26","date_gmt":"2026-10-26T03:33:26","guid":{"rendered":"https:\/\/lcr-reader.com\/blog\/test-automation-component-validation\/"},"modified":"2026-10-26T03:33:26","modified_gmt":"2026-10-26T03:33:26","slug":"test-automation-component-validation","status":"publish","type":"post","link":"https:\/\/lcr-reader.com\/blog\/test-automation-component-validation\/","title":{"rendered":"Test Automation for Faster Component Validation"},"content":{"rendered":"<p>A production line stops for a questionable 0402 capacitor, a repair bench receives a board with an intermittent rail fault, or incoming inspection finds a reel with uncertain date-code history. In each case, test automation turns a slow sequence of individual measurements into a defined, repeatable decision process. The goal is not simply to run more tests. It is to produce measurement results that are fast enough for the workflow and credible enough to support a pass, fail, sort, or escalation decision.<\/p>\n<p>For electronics teams, the quality of that decision depends on more than software. It depends on test frequency, fixture design, contact integrity, instrument accuracy, parasitic control, limits, and the data retained after the test is complete. Automation exposes weak measurement practices quickly. If a manual process has unstable contact resistance or poorly defined limits, automating it only delivers inconsistent results faster.<\/p>\n<h2>What Test Automation Means in Electronics<\/h2>\n<p>In an electronics environment, test automation is the coordinated use of instruments, fixtures, software, and decision rules to measure devices or assemblies without requiring an operator to interpret every reading manually. A system may identify a component, select a measurement mode, apply the correct test conditions, compare the result with acceptance limits, and record the outcome with a serial number, lot number, or work order.<\/p>\n<p>The test can be as focused as sorting loose resistors by value and tolerance, or as extensive as validating a populated PCB through power-up, functional, analog signature, and communication checks. The appropriate level of automation depends on volume, product risk, test time, and the cost of an escaped defect.<\/p>\n<p>A high-volume manufacturing cell often requires a fixture, switching hardware, barcode input, and integration with manufacturing records. A field-service team may need a portable workflow that pairs direct-contact measurement with <a href=\"https:\/\/lcr-reader.com\/downloads\/BT\/LCR-Reader_Logger_Manual.pdf\">Bluetooth data logging<\/a>. Both are legitimate forms of automation when they reduce operator variation and preserve defensible data.<\/p>\n<h2>Start With the Measurement Decision<\/h2>\n<p>A useful automation project begins with the question that must be answered, not the interface that will control the instrument. \u201cMeasure capacitance\u201d is not a complete test requirement. \u201cVerify that the installed 10 \u00b5F X7R capacitor measures 7.5 to 12 \u00b5F at the specified test frequency and bias conditions, with stable contact and recorded limits\u201d is closer to one.<\/p>\n<p>For passive components, define the parameter and the conditions that affect it. Capacitance, inductance, ESR, dissipation factor, DC resistance, and impedance can change materially with frequency, voltage, current, temperature, and fixture parasitics. A component that appears acceptable at one test frequency can behave differently in its intended circuit.<\/p>\n<p>Acceptance limits deserve the same discipline. Limits copied directly from a nominal value can reject good parts or, worse, pass marginal ones. Build limits around the component specification, expected production variation, instrument uncertainty, fixture contribution, and the actual failure mechanism being screened. For assembled boards, characterize known-good units before deciding whether limits should be absolute, tolerance-based, or statistically derived.<\/p>\n<h2>Match the Instrument to the Test Point<\/h2>\n<p>The fastest automated sequence is ineffective if the measurement front end cannot resolve the parameter of interest. This is especially relevant for small SMD components, low-value inductors, low-ESR capacitors, and circuit nodes where leads and fixtures add more impedance than the device under test.<\/p>\n<p>An LCR meter should provide the required test frequency, resolution, and measurement range for the component family. For work involving sub-1 pF capacitance or sub-10 nH inductance, fixture geometry and compensation are part of the measurement system. Kelvin connections reduce lead and contact resistance effects when measuring low resistance or ESR. Direct-contact tweezer instruments can accelerate loose-component inspection by minimizing the setup between parts, provided probe condition and zeroing procedures are controlled.<\/p>\n<p>For boards that cannot be powered safely, analog signature analysis can add a different kind of diagnostic coverage. Rather than confirming a single component value, it compares voltage-current behavior at a node or device. This can reveal shorts, opens, damaged junctions, or suspicious differences against a known-good reference. It is not a replacement for functional test, but it can shorten fault isolation substantially.<\/p>\n<p><a href=\"https:\/\/lcr-reader.com\/colibri.html\">LCR-Reader instruments<\/a> are particularly suited to portable component validation where direct contact, automatic component identification, wide measurement range, and documented calibration matter more than the footprint of a conventional bench setup.<\/p>\n<h2>Design the Fixture Before Writing the Sequence<\/h2>\n<p>Test code cannot compensate for an unstable fixture. Repeated contact failure is one of the most common reasons automated tests become slow, noisy, and distrusted by operators. The fixture must position the part or board consistently, apply appropriate force, and keep unintended resistance, capacitance, and inductance away from sensitive measurement paths.<\/p>\n<p>For low-level measurements, use short connections and separate force and sense paths where applicable. Guarding may be necessary for very low capacitance or high-impedance nodes. Shielding can reduce noise pickup, but it must be implemented with awareness of its added capacitance. Open, short, and load compensation should be performed at the same electrical reference plane as the test article whenever possible.<\/p>\n<p>A production fixture also needs a maintenance plan. Probe pins wear, contamination accumulates, cables flex, and connector retention changes. Track contact-related failures separately from product failures. If retesting changes the result, the process needs a defined rule for recontact, inspection, and disposition rather than an informal operator judgment.<\/p>\n<h2>Build a Test Sequence That Diagnoses, Not Just Detects<\/h2>\n<p>An efficient sequence moves from low-risk, high-information checks to tests that require more time or could stress the unit. First confirm identity and fixture presence. Then look for gross shorts, opens, reverse polarity, missing components, or incorrect resistance values before applying power. Controlled power-up can follow, with current limits and voltage monitoring set to protect the unit.<\/p>\n<p>Test steps should return more than pass or fail whenever practical. Record the measured value, units, test conditions, limits, instrument identity, and timestamp. A failed 4.7 \u00b5H inductor test is more useful when the record shows 2.1 \u00b5H at the selected frequency, rather than an undifferentiated failure code.<\/p>\n<p>Diagnostic branching is valuable when it avoids needless retest. For example, an out-of-limit capacitance reading may trigger a contact check and repeat measurement. If the result remains low, the system can route the unit to a visual inspection or polarity check. This differs from repeatedly cycling the same test until a favorable result appears. Retest rules must be controlled, logged, and technically justified.<\/p>\n<h2>Data Traceability Is Part of the Test<\/h2>\n<p>Automation creates value when measurement data can be found, interpreted, and compared later. At minimum, retain the unit identifier, operator or station identifier, test revision, instrument configuration, calibration status, raw readings, pass\/fail result, and any retest events. In regulated, aerospace, defense, or high-reliability work, this record supports audits as well as engineering investigation.<\/p>\n<p>Calibration status deserves specific attention. A measurement result is only as credible as the instrument and reference path behind it. Use instruments with an appropriate calibration interval and traceability structure, verify performance with suitable check standards, and prevent expired equipment from being selected by the test software. For <a href=\"https:\/\/lcr-reader.com\/calibration\/calibration_results.pdf\">precision LCR and ESR work<\/a>, the uncertainty of the standard, adapter, and fixture should be considered alongside the meter specification.<\/p>\n<p>Trend data can reveal problems that individual pass\/fail outcomes miss. A gradual increase in ESR, a shift in capacitance distribution, or more frequent recontact attempts may indicate a supplier change, fixture wear, process drift, or incoming material issue before it becomes a major yield event.<\/p>\n<h2>Where Teams Over-Automate<\/h2>\n<p>Not every test should be automated. Low-volume engineering investigations often benefit from a skilled technician who can change test conditions, inspect physical evidence, and follow unexpected behavior. Building a complex fixture for a design that will change next month can consume more time than it saves.<\/p>\n<p>The better approach is modularity. Automate stable, repeated measurements first, especially those that are time-consuming, prone to transcription errors, or difficult to perform consistently by hand. Keep test limits, instrument settings, and report formats under revision control. As the product stabilizes and volume increases, add fixtures, switching, and database integration where the return is clear.<\/p>\n<p>The practical standard is simple: automate the measurement only after defining what a good result means, how accurately it must be measured, and what action follows a failure. When those details are engineered into the system, every automated test becomes more than a faster reading. It becomes usable evidence for building, repairing, and releasing reliable electronics.<\/p>\n","protected":false},"excerpt":{"rendered":"<p>Test automation speeds component validation with repeatable LCR, ESR, DMM, and signature measurements, traceable data, and practical pass\/fail limits.<\/p>\n","protected":false},"author":0,"featured_media":778,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[1],"tags":[],"class_list":["post-777","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-uncategorized"],"yoast_head":"<!-- This site is optimized with the Yoast SEO plugin v28.2 - https:\/\/yoast.com\/product\/yoast-seo-wordpress\/ -->\n<title>Test Automation for Faster Component Validation - Smart Tweezers LCR-Reader<\/title>\n<meta name=\"description\" content=\"Test automation speeds component validation with repeatable LCR, ESR, DMM, and signature measurements, traceable data, and practical pass\/fail limits.\" \/>\n<meta name=\"robots\" content=\"index, follow, max-snippet:-1, max-image-preview:large, max-video-preview:-1\" \/>\n<link rel=\"canonical\" href=\"https:\/\/lcr-reader.com\/blog\/test-automation-component-validation\/\" \/>\n<meta property=\"og:locale\" content=\"en_US\" \/>\n<meta property=\"og:type\" content=\"article\" \/>\n<meta property=\"og:title\" content=\"Test Automation for Faster Component Validation - Smart Tweezers LCR-Reader\" \/>\n<meta property=\"og:description\" content=\"Test automation speeds component validation with repeatable LCR, ESR, DMM, and signature measurements, traceable data, and practical pass\/fail limits.\" \/>\n<meta property=\"og:url\" content=\"https:\/\/lcr-reader.com\/blog\/test-automation-component-validation\/\" \/>\n<meta property=\"og:site_name\" content=\"Smart Tweezers LCR-Reader\" \/>\n<meta property=\"article:publisher\" content=\"https:\/\/www.facebook.com\/LCRReader\" \/>\n<meta property=\"article:published_time\" content=\"2026-10-26T03:33:26+00:00\" \/>\n<meta property=\"og:image\" content=\"https:\/\/lcr-reader.com\/blog\/wp-content\/uploads\/2026\/10\/test-automation-for-faster-component-validation-featured.webp\" \/>\n\t<meta property=\"og:image:width\" content=\"1536\" \/>\n\t<meta property=\"og:image:height\" content=\"1024\" \/>\n\t<meta property=\"og:image:type\" content=\"image\/webp\" \/>\n<meta name=\"twitter:card\" content=\"summary_large_image\" \/>\n<meta name=\"twitter:label1\" content=\"Est. reading time\" \/>\n\t<meta name=\"twitter:data1\" content=\"7 minutes\" \/>\n<script type=\"application\/ld+json\" class=\"yoast-schema-graph\">{\"@context\":\"https:\\\/\\\/schema.org\",\"@graph\":[{\"@type\":\"Article\",\"@id\":\"https:\\\/\\\/lcr-reader.com\\\/blog\\\/test-automation-component-validation\\\/#article\",\"isPartOf\":{\"@id\":\"https:\\\/\\\/lcr-reader.com\\\/blog\\\/test-automation-component-validation\\\/\"},\"author\":{\"name\":\"\",\"@id\":\"\"},\"headline\":\"Test Automation for Faster Component Validation\",\"datePublished\":\"2026-10-26T03:33:26+00:00\",\"mainEntityOfPage\":{\"@id\":\"https:\\\/\\\/lcr-reader.com\\\/blog\\\/test-automation-component-validation\\\/\"},\"wordCount\":1379,\"commentCount\":0,\"publisher\":{\"@id\":\"https:\\\/\\\/lcr-reader.com\\\/blog\\\/#organization\"},\"image\":{\"@id\":\"https:\\\/\\\/lcr-reader.com\\\/blog\\\/test-automation-component-validation\\\/#primaryimage\"},\"thumbnailUrl\":\"https:\\\/\\\/lcr-reader.com\\\/blog\\\/wp-content\\\/uploads\\\/2026\\\/10\\\/test-automation-for-faster-component-validation-featured.webp\",\"inLanguage\":\"en-US\",\"potentialAction\":[{\"@type\":\"CommentAction\",\"name\":\"Comment\",\"target\":[\"https:\\\/\\\/lcr-reader.com\\\/blog\\\/test-automation-component-validation\\\/#respond\"]}]},{\"@type\":\"WebPage\",\"@id\":\"https:\\\/\\\/lcr-reader.com\\\/blog\\\/test-automation-component-validation\\\/\",\"url\":\"https:\\\/\\\/lcr-reader.com\\\/blog\\\/test-automation-component-validation\\\/\",\"name\":\"Test Automation for Faster Component Validation - Smart Tweezers LCR-Reader\",\"isPartOf\":{\"@id\":\"https:\\\/\\\/lcr-reader.com\\\/blog\\\/#website\"},\"primaryImageOfPage\":{\"@id\":\"https:\\\/\\\/lcr-reader.com\\\/blog\\\/test-automation-component-validation\\\/#primaryimage\"},\"image\":{\"@id\":\"https:\\\/\\\/lcr-reader.com\\\/blog\\\/test-automation-component-validation\\\/#primaryimage\"},\"thumbnailUrl\":\"https:\\\/\\\/lcr-reader.com\\\/blog\\\/wp-content\\\/uploads\\\/2026\\\/10\\\/test-automation-for-faster-component-validation-featured.webp\",\"datePublished\":\"2026-10-26T03:33:26+00:00\",\"description\":\"Test automation speeds component validation with repeatable LCR, ESR, DMM, and signature measurements, traceable data, and practical pass\\\/fail limits.\",\"breadcrumb\":{\"@id\":\"https:\\\/\\\/lcr-reader.com\\\/blog\\\/test-automation-component-validation\\\/#breadcrumb\"},\"inLanguage\":\"en-US\",\"potentialAction\":[{\"@type\":\"ReadAction\",\"target\":[\"https:\\\/\\\/lcr-reader.com\\\/blog\\\/test-automation-component-validation\\\/\"]}]},{\"@type\":\"ImageObject\",\"inLanguage\":\"en-US\",\"@id\":\"https:\\\/\\\/lcr-reader.com\\\/blog\\\/test-automation-component-validation\\\/#primaryimage\",\"url\":\"https:\\\/\\\/lcr-reader.com\\\/blog\\\/wp-content\\\/uploads\\\/2026\\\/10\\\/test-automation-for-faster-component-validation-featured.webp\",\"contentUrl\":\"https:\\\/\\\/lcr-reader.com\\\/blog\\\/wp-content\\\/uploads\\\/2026\\\/10\\\/test-automation-for-faster-component-validation-featured.webp\",\"width\":1536,\"height\":1024,\"caption\":\"Test Automation for Faster Component Validation\"},{\"@type\":\"BreadcrumbList\",\"@id\":\"https:\\\/\\\/lcr-reader.com\\\/blog\\\/test-automation-component-validation\\\/#breadcrumb\",\"itemListElement\":[{\"@type\":\"ListItem\",\"position\":1,\"name\":\"Home\",\"item\":\"https:\\\/\\\/lcr-reader.com\\\/blog\\\/\"},{\"@type\":\"ListItem\",\"position\":2,\"name\":\"Test Automation for Faster Component Validation\"}]},{\"@type\":\"WebSite\",\"@id\":\"https:\\\/\\\/lcr-reader.com\\\/blog\\\/#website\",\"url\":\"https:\\\/\\\/lcr-reader.com\\\/blog\\\/\",\"name\":\"Smart Tweezers LCR-Reader\",\"description\":\"Smart Tweezers LCR-Reader LCR-meter\",\"publisher\":{\"@id\":\"https:\\\/\\\/lcr-reader.com\\\/blog\\\/#organization\"},\"potentialAction\":[{\"@type\":\"SearchAction\",\"target\":{\"@type\":\"EntryPoint\",\"urlTemplate\":\"https:\\\/\\\/lcr-reader.com\\\/blog\\\/?s={search_term_string}\"},\"query-input\":{\"@type\":\"PropertyValueSpecification\",\"valueRequired\":true,\"valueName\":\"search_term_string\"}}],\"inLanguage\":\"en-US\"},{\"@type\":\"Organization\",\"@id\":\"https:\\\/\\\/lcr-reader.com\\\/blog\\\/#organization\",\"name\":\"Siborg Systems Inc\",\"url\":\"https:\\\/\\\/lcr-reader.com\\\/blog\\\/\",\"logo\":{\"@type\":\"ImageObject\",\"inLanguage\":\"en-US\",\"@id\":\"https:\\\/\\\/lcr-reader.com\\\/blog\\\/#\\\/schema\\\/logo\\\/image\\\/\",\"url\":\"https:\\\/\\\/lcr-reader.com\\\/blog\\\/wp-content\\\/uploads\\\/2026\\\/08\\\/siborglogo-256x85-2.jpg\",\"contentUrl\":\"https:\\\/\\\/lcr-reader.com\\\/blog\\\/wp-content\\\/uploads\\\/2026\\\/08\\\/siborglogo-256x85-2.jpg\",\"width\":256,\"height\":85,\"caption\":\"Siborg Systems Inc\"},\"image\":{\"@id\":\"https:\\\/\\\/lcr-reader.com\\\/blog\\\/#\\\/schema\\\/logo\\\/image\\\/\"},\"sameAs\":[\"https:\\\/\\\/www.facebook.com\\\/LCRReader\"]}]}<\/script>\n<!-- \/ Yoast SEO plugin. -->","yoast_head_json":{"title":"Test Automation for Faster Component Validation - Smart Tweezers LCR-Reader","description":"Test automation speeds component validation with repeatable LCR, ESR, DMM, and signature measurements, traceable data, and practical pass\/fail limits.","robots":{"index":"index","follow":"follow","max-snippet":"max-snippet:-1","max-image-preview":"max-image-preview:large","max-video-preview":"max-video-preview:-1"},"canonical":"https:\/\/lcr-reader.com\/blog\/test-automation-component-validation\/","og_locale":"en_US","og_type":"article","og_title":"Test Automation for Faster Component Validation - Smart Tweezers LCR-Reader","og_description":"Test automation speeds component validation with repeatable LCR, ESR, DMM, and signature measurements, traceable data, and practical pass\/fail limits.","og_url":"https:\/\/lcr-reader.com\/blog\/test-automation-component-validation\/","og_site_name":"Smart Tweezers LCR-Reader","article_publisher":"https:\/\/www.facebook.com\/LCRReader","article_published_time":"2026-10-26T03:33:26+00:00","og_image":[{"width":1536,"height":1024,"url":"https:\/\/lcr-reader.com\/blog\/wp-content\/uploads\/2026\/10\/test-automation-for-faster-component-validation-featured.webp","type":"image\/webp"}],"twitter_card":"summary_large_image","twitter_misc":{"Est. reading time":"7 minutes"},"schema":{"@context":"https:\/\/schema.org","@graph":[{"@type":"Article","@id":"https:\/\/lcr-reader.com\/blog\/test-automation-component-validation\/#article","isPartOf":{"@id":"https:\/\/lcr-reader.com\/blog\/test-automation-component-validation\/"},"author":{"name":"","@id":""},"headline":"Test Automation for Faster Component Validation","datePublished":"2026-10-26T03:33:26+00:00","mainEntityOfPage":{"@id":"https:\/\/lcr-reader.com\/blog\/test-automation-component-validation\/"},"wordCount":1379,"commentCount":0,"publisher":{"@id":"https:\/\/lcr-reader.com\/blog\/#organization"},"image":{"@id":"https:\/\/lcr-reader.com\/blog\/test-automation-component-validation\/#primaryimage"},"thumbnailUrl":"https:\/\/lcr-reader.com\/blog\/wp-content\/uploads\/2026\/10\/test-automation-for-faster-component-validation-featured.webp","inLanguage":"en-US","potentialAction":[{"@type":"CommentAction","name":"Comment","target":["https:\/\/lcr-reader.com\/blog\/test-automation-component-validation\/#respond"]}]},{"@type":"WebPage","@id":"https:\/\/lcr-reader.com\/blog\/test-automation-component-validation\/","url":"https:\/\/lcr-reader.com\/blog\/test-automation-component-validation\/","name":"Test Automation for Faster Component Validation - Smart Tweezers LCR-Reader","isPartOf":{"@id":"https:\/\/lcr-reader.com\/blog\/#website"},"primaryImageOfPage":{"@id":"https:\/\/lcr-reader.com\/blog\/test-automation-component-validation\/#primaryimage"},"image":{"@id":"https:\/\/lcr-reader.com\/blog\/test-automation-component-validation\/#primaryimage"},"thumbnailUrl":"https:\/\/lcr-reader.com\/blog\/wp-content\/uploads\/2026\/10\/test-automation-for-faster-component-validation-featured.webp","datePublished":"2026-10-26T03:33:26+00:00","description":"Test automation speeds component validation with repeatable LCR, ESR, DMM, and signature measurements, traceable data, and practical pass\/fail limits.","breadcrumb":{"@id":"https:\/\/lcr-reader.com\/blog\/test-automation-component-validation\/#breadcrumb"},"inLanguage":"en-US","potentialAction":[{"@type":"ReadAction","target":["https:\/\/lcr-reader.com\/blog\/test-automation-component-validation\/"]}]},{"@type":"ImageObject","inLanguage":"en-US","@id":"https:\/\/lcr-reader.com\/blog\/test-automation-component-validation\/#primaryimage","url":"https:\/\/lcr-reader.com\/blog\/wp-content\/uploads\/2026\/10\/test-automation-for-faster-component-validation-featured.webp","contentUrl":"https:\/\/lcr-reader.com\/blog\/wp-content\/uploads\/2026\/10\/test-automation-for-faster-component-validation-featured.webp","width":1536,"height":1024,"caption":"Test Automation for Faster Component Validation"},{"@type":"BreadcrumbList","@id":"https:\/\/lcr-reader.com\/blog\/test-automation-component-validation\/#breadcrumb","itemListElement":[{"@type":"ListItem","position":1,"name":"Home","item":"https:\/\/lcr-reader.com\/blog\/"},{"@type":"ListItem","position":2,"name":"Test Automation for Faster Component Validation"}]},{"@type":"WebSite","@id":"https:\/\/lcr-reader.com\/blog\/#website","url":"https:\/\/lcr-reader.com\/blog\/","name":"Smart Tweezers LCR-Reader","description":"Smart Tweezers LCR-Reader LCR-meter","publisher":{"@id":"https:\/\/lcr-reader.com\/blog\/#organization"},"potentialAction":[{"@type":"SearchAction","target":{"@type":"EntryPoint","urlTemplate":"https:\/\/lcr-reader.com\/blog\/?s={search_term_string}"},"query-input":{"@type":"PropertyValueSpecification","valueRequired":true,"valueName":"search_term_string"}}],"inLanguage":"en-US"},{"@type":"Organization","@id":"https:\/\/lcr-reader.com\/blog\/#organization","name":"Siborg Systems Inc","url":"https:\/\/lcr-reader.com\/blog\/","logo":{"@type":"ImageObject","inLanguage":"en-US","@id":"https:\/\/lcr-reader.com\/blog\/#\/schema\/logo\/image\/","url":"https:\/\/lcr-reader.com\/blog\/wp-content\/uploads\/2026\/08\/siborglogo-256x85-2.jpg","contentUrl":"https:\/\/lcr-reader.com\/blog\/wp-content\/uploads\/2026\/08\/siborglogo-256x85-2.jpg","width":256,"height":85,"caption":"Siborg Systems Inc"},"image":{"@id":"https:\/\/lcr-reader.com\/blog\/#\/schema\/logo\/image\/"},"sameAs":["https:\/\/www.facebook.com\/LCRReader"]}]}},"_links":{"self":[{"href":"https:\/\/lcr-reader.com\/blog\/wp-json\/wp\/v2\/posts\/777","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/lcr-reader.com\/blog\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/lcr-reader.com\/blog\/wp-json\/wp\/v2\/types\/post"}],"replies":[{"embeddable":true,"href":"https:\/\/lcr-reader.com\/blog\/wp-json\/wp\/v2\/comments?post=777"}],"version-history":[{"count":0,"href":"https:\/\/lcr-reader.com\/blog\/wp-json\/wp\/v2\/posts\/777\/revisions"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/lcr-reader.com\/blog\/wp-json\/wp\/v2\/media\/778"}],"wp:attachment":[{"href":"https:\/\/lcr-reader.com\/blog\/wp-json\/wp\/v2\/media?parent=777"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/lcr-reader.com\/blog\/wp-json\/wp\/v2\/categories?post=777"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/lcr-reader.com\/blog\/wp-json\/wp\/v2\/tags?post=777"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}